How To Cut And Sew Simple A line gown

Good morning lovelies, happy weekend to you all.
Today I made an A line gown, and it's very easy to make.

Materials needed.
Ankara wrapper
Lining
Zip
Bead
Chalk
Tape
Scissor
Aiming gum.

The first thing to do is to measure out your full length from the complete material and fold it by two and you will both side that you will use for the back and front side.
Then you place the first one on your table or anything u use for cutting then place the second one on it and give out your two inches allowance for the zip, measure out your shoulder, hand pit and your neck then u cut it out.

Then you cut out your lining for both part, by placing your material on the lining to cut.

Secondly you proceed to cut out the hand depending on the length and size u want, and for this particular hand I will be making a plinting at the hand of which I also cut out the material for it and the lining, with the pocket also.

Now you will proceed to fixed in the lining for both part and that for hand which you will be plinting then you iron it.

![IMG_20250409_072837_128.jpg](https://files.peakd.com/file/peakd-hive/jonathanjediel/23uQvfBec2SJeCtZoFBMdFPU1N8q5h7qGNScDbuQp6j36bcrFBxEvVRdv8WSpLa5tsuCh.jp
And for front neck that's why you use your aiming gum for you to have the neck to be neat and so to fix your bead easily.
You cut your your aiming gum and fixed it inside, it's going to be in between the lining and Ankara Inside then you iron it to gum.

![IMG_20250409_072931_142.jpg](https://files.peakd.com/file/peakd-hive/jonathanjediel/EoiX9jgmUZUNpXjBe45Ao6ECWps2kFDrR1QurGDY5uA3ao44jP46kP41ZCrDm6u2F9L.

Then you provide to plint out the material for the hand after fixing the lining.

Then you proceed to fix the hand before joining the gown.
And when joining it you measure out sixteen inches from the top and mark it,then you take from that sixteen and measure out six inches again and live the opening and you continue sewing from the six inches down.

Then you place the material for the pocket and sew it to on each part and extreme end of the allowance inside, then you Join it together and as you can see I used my chalk to trace out where to sew.

After joining everything you fixed your zip and iron it,then you proceed with your beading work in which ever way you want but as for this I just fixed it in two lines using my hand needle and thread.

Thank you for checking on my post, enjoy the rest of your day and do have a lovely weekend.