Elaboration of a Perinola/Elaboración de una Perinola[ENG/ESP]

avatar

Hello dear friends of @DIYhub, greetings and happy day, this time I come to show you the elaboration of a perinola that I made for my son for his presentation of traditional games in his class, which had to be made with recyclable materials, which was entertaining and useful for what he wanted to achieve.


REVIEW (18).jpg
Design in CANVA


The first thing you need is:
  1. a can
  2. Wick yarn
  3. A pencil or color
  4. Hammer
  5. Nail
  6. Crepe paper
  7. Scissors
  8. Silicone
  9. Figure to decorate.

REVIEW (19).jpg
Design in CANVA


1 Step. We start with the can, the first thing I did with the help of the hammer and nail to open a hole in the bottom of the metal, a small hole that would allow me to then put the wick thread, which with a single blow was achieved, and having it before putting the thread, I focus on lining the can with the help of crepe paper gluing section by section with silicone, and when it was well glued, cut the edges of both the top and bottom to make it even, and then look for decorative figures in this case the paw patrol paws, one at each end to decorate, so that it was more decorative and represent one of the series that he likes.

REVIEW (20).jpg
Design in CANVA


2 Step. After having the can lined and decorated at once, I set out to find the wick thread, I measured it in a way in which it was not so long but not so short, so that it would be useful to be able to move and play as it should, and having it in a measure that I considered appropriate, I proceeded to cut it, Once there I proceeded to put the thread one of its ends inside the hole I had made, pushing little by little so that when I reached the other end it would give me the opportunity to tie a knot, trying not to let it come out through the hole or break easily when pulling it to achieve the objective of the perinola.

REVIEW (22).jpg
Design in CANVA


3 Step, and finishing this nice and simple game, I used the other end of the thread to tie it to the color I had, which I made several knots so that it would not come loose, which was better and so it would hold properly, and then I tested the strength of the thread and that when using it did not come out.

IMG_20250707_192806.jpg
Image by me


It is a simple traditional game design, but very useful especially if you are asked for it for your child's class and you have things at hand to make it, as well as a yo-yo or other games are fun and enjoyable to perform, as you learn to know more about them and how they are made, such as the dynamics they provide.

separadoryasma1.png

Thank you very much for reading it. I hope you like it. If you have any comments I'll be glad to answer and if you want to know more about me I leave you my:

EL FINAL DE POSTHIVE (1).jpg

Translated Using Deepl

separadoryasma1.png

ESPAÑOL

Hola queridos amigos de @DIYhub, saludos y feliz día, en esta oportunidad vengo para mostrarle la elaboración de una perinola que le hice a mi hijo para su presentación de juegos tradicionales en su clase, la cual debía ser hecho con materiales reciclables, lo cual resulto entretenido y útil para lo que se quería llegar.


REVIEW (18).jpg
Diseño en CANVA


Lo primero que se necesita es:
  1. Una lata
  2. Hilo pabilo
  3. Un lápiz o color
  4. Martillo
  5. Clavo
  6. Papel crepe
  7. Tijera
  8. Silicón
  9. Figura para decorar.

REVIEW (19).jpg
Diseño en CANVA


1 Paso. Partimos Con la lata, lo primero que hice con ayuda del martillo y el clavo abrirle un hueco en la parte de abajo del metal, un hueco pequeño que me permitiera luego meterle el hilo pabilo, lo cual con un solo golpe se logró, ya al tener ello antes de meter el hilo, me enfoque en forrar la lata con ayuda del papel crepe pegando tramo por tramo con el silicón, ya cuando estaba bien pegada, corte los bordes tanto de la parte de arriba como la de abajo para que quedara parejo, ya luego busque las figuras decorativas en este caso las patitas de paw patrol, una en cada extremo para decorar, de manera que fuera más decorativo y representará una de las series que a él le gusta.

REVIEW (20).jpg
Diseño en CANVA


2 Paso. Ya luego de tener la lata forrada y decorada de una vez, me dispuse a buscar el hilo pabilo, lo medí de una manera en la cual no fuese ni tan largo pero tampoco tan corto, cosa de que fuese útil para el poderlo mover y jugar como es debido, ya al tenerlo en una medida que consideraba acorde, procedí a cortarlo, ya ahí procedí a poner el hilo uno de sus extremos dentro de hueco que le había hecho, empujando poco a poco para que al llegar al otro extremo me diera la oportunidad de hacerle un nudo, buscando que este no se salga por el orificio o se rompiera de forma fácil cuando se jale para lograr el objetivo de la perinola.

REVIEW (22).jpg
Diseño en CANVA


3 Paso, ya finalizando este lindo y sencillo juego, el otro extremo del hilo lo utilice para amarrarlo al color que tenía, el cual le hice varios nudos para que no se soltara, lo cual resulto mejor y así se sostuviera correctamente, ya de ahí probé la resistencia del hilo y que al momento de usarlo no se saliera.

IMG_20250707_192806.jpg
Imagen de mi Autoría


Es un diseño de juego tradicional sencillo, pero muy útil sobre todo si te lo piden para la clase de tu hijo y tienes cosas a la mano para realizarlo, así como un yoyo u otros juegos resultan entretenidos y agradables de realizar, ya que aprender a conocer más de ellos y su forma de elaborar, como la dinámica que proporcionan.

separadoryasma1.png

Muchas gracias por leerlo. Espero sea de su agrado. Cualquier comentario con gusto estaré para responder y si quieren saber más de mi les dejo mis:

EL FINAL DE POSTHIVE (1).jpg

separadoryasma2.png



0
0
0.000
10 comments
avatar

It is nice and lovely. Your son is happy to get this. It looks so cool. Good to see how you made this. Well done!


selected by @rezoanulvibes

0
0
0.000
avatar

muchas gracias de verdad! sii le encanto y me alegro haber llegado al objetivo, gracias!


thank you very much indeed! sii loved it and I'm glad to have reached the goal, thank you!

0
0
0.000
avatar

His happy face says it all—this work is beautiful and perfect. Thank you for sharing the process photographically. It's great to have you in our DIYHub community 🙏

0
0
0.000
avatar

jeje si le gusto mucho y eso me alegro! muchas gracias! bendiciones! 😊


hehe yes he liked me a lot and that makes me happy! thank you very much! blessings! 😊

0
0
0.000
avatar

Hola amiga quedó súper está perinola y mejor aun que la realizaste con materiales de reciclaje está súper bien como explicaste la elaboración, éxitos amiga 🫂

0
0
0.000
avatar

jeje si lo bueno que le gustó mucho a mi hijo, muchas gracias por pasar! saludos!

0
0
0.000
avatar

Me encantaba jugar perinola, hasta competencias hacíamos. Quedó muy divertida esa perinola y tierna a la vez con esa huella de perrito y el palo un color, muy creativo. Saludos.

0
0
0.000
avatar

jeje muchas gracias! si lo bueno es que le encanto a mi hijo quien tenia que presentarla, muchas gracias!

0
0
0.000
avatar

Amazing artwork 👏. Cute son is looking very happy ☺️.

0
0
0.000
avatar

muchas gracias! si le encanto 😊


thank you very much! yes he loved it 😊

0
0
0.000