[Esp/Eng]Realizando Floreros con Material de Provecho / Making Vases with Recycled Material

avatar

[Esp/Eng]Realizando Floreros con Material de Provecho / Making Vases with Recycled Material

@rosselena

image.png

Saludos amigos de la comunidad hoy vamos a realizar dos lindos floreros con material de provecho, así que continúen leyendo y tomen papel y lápiz o comparta la publicación para que tengan guardado todo el procedimiento, solo me queda decirle manos a la obra

image.png
Los materiales que utilice para realizar este proyecto son muy sencillos y los describo a continuación:

  • 2 Botellas vacías de alguna bebida espirituosa
  • Pinceles
  • Pintura al frio
  • Pistola de silicon
  • Un trozo de mecatillo o macramé
  • Un Pedazo de esponja
  • Flores plásticas recicladas
  • Paleta plástica para ligar los colores

image.png

Lo primero será colocar pintura blanca, roja y azul en la paleta, cargamos un lado del pincel con rojo y el otro lado con blanco, descargamos un poco la pintura y comenzamos a realizar las flores rojas en una de las botellas, los pétalos los hacemos de adentro hacia afuera para crear el matizado de los dos colores y repetimos el mismo procedimiento hasta completar todos los pétalos, de igual manera realizamos el procedimiento con la flor azul en la otra botella

image.png

Para realizar el tallo de las rosas repetimos el procedimiento anterior, colocamos blanco y verde cargamos un lado del pincel con verde y el otro lado con el blanco, descargamos sobre la paleta y comenzamos a realizar todo el tallo y las hojas de las rosas o flores, con la punta de un pincel pequeño vamos a colocar pequeños puntos blancos sobre las rosas

image.png

Con la esponjita y la pintura dorada vamos a realizar pequeños toques para pintar en el borde de abajo de la botella

image.png

Con la pistola de silicon caliente vamos a colocar un poco de silicón sobre el pico de la botella para pegar el mecatillo o macramé, usando un diseño diferente en cada uno para que no sean iguales

image.png

De igual manera con la pistola de silicon vamos a pegar algunas rosas del color de las que pintamos en cada una de las botellas, en la que pintamos de azul colocamos rosas blancas y azules y en la que pintamos de rojo colocamos una rosa roja y una rosada más pequeña

image.png

Finalizamos colocando algunas espigas doradas sobre nuestras botellas que ahora convertimos en lindos floreros con mucho ingenio usando el reciclaje
Les voy a comentar que las fotos mostradas me pertenecen y fueron tomadas con mi teléfono celular Infinity Hot Play 12 Traducido con el traductor google # -------- #
English
![image.png]()
Greetings friends of the community, today we are going to make two beautiful vases with useful material, so continue reading and take paper and pencil or share the publication so that you have the entire procedure saved, I just have to tell you get to work

image.png
The materials I used to carry out this project are very simple and I describe them below:

  • 2 empty bottles of a spirit drink
  • Brushes
  • Cold paint
  • Silicone gun
  • A piece of rope or macramé
  • A piece of sponge
  • Recycled plastic flowers
  • Plastic palette to combine colors

image.png

The first thing will be to place white, red and blue paint on the palette, we load one side of the brush with red and the other side with white, we unload the paint a little and begin to make the red flowers in one of the bottles, we make the petals from the inside out to create the nuance of the two colors and we repeat the same procedure until all the petals are complete, in the same way we carry out the procedure with the blue flower in the other bottle

image.png

To make the stem of the roses we repeat the previous procedure, we place white and green, we load one side of the brush with green and the other side with white, we unload it on the palette and we begin to make the entire stem and the leaves of the roses or flowers, with the tip of a small brush we are going to place small white dots on the roses

image.png

With the sponge and the gold paint we are going to make small touches to paint on the bottom edge of the bottle

image.png

With the hot silicone gun we are going to place a little silicone on the spout of the bottle to glue the twine or macramé, using a different design on each one so that they are not the same

image.png

In the same way, with the silicone gun we are going to glue some roses of the color we painted in each of the bottles, in the one we painted blue we placed white and blue roses and in the one we painted in red we place a red rose and a smaller pink one

image.png

We finished by placing some golden spikes on our bottles that we now turn into pretty vases with a lot of ingenuity using recycling
I am going to tell you that the photos shown belong to me and were taken with my Infinity Hot Play 12 cell phone. Translated with Google Translate



0
0
0.000
4 comments
avatar
@dayadam just sent you a DIY token as a little appreciation for your post dear @rosselena! Feel free to multiply it by sending someone else !DIY in a comment :) You can do that x times a day depending on your balance so:

Don't be shy - share some DIY!

You can query your personal balance by !DIYSTATS

0
0
0.000