I Got An Oldie - An Uninteresting Gas-guzzling⛽️ Metalhead 🔨 🚗

avatar
(Edited)

20240929_152030.jpg

One thing I never got to figure out was getting a vehicle that would suit my needs. I was either living too low to afford a vehicle or I had other priorities.

While I realised I obviously needed a vehicle to move around, I wasn't exactly particular about getting.

I however got a deal from a relative for a super-used SUV which was past its lifetime at over 350k mileage - an uninteresting Pathfinder R50 (1997) with an updated 1999 front facelift.

20240929_151432.jpg

Now before you crucify me, this vehicle works but is not not in any way in good shape as per the metrics of a good car.😅

20240929_152223.jpg

20240929_152442.jpg
The state of the vehicle before purchase

He was planning to sell it off to a farmer who would retire the vehicle to farm work.
I considered the possibility of getting it and how much it would cost to get in good shape for cruising within the city for my video jobs.
He offered to sell it at 600 dollars!
I couldn't resist it, considering how much I'd get a more modern car.

The uninteresting underpowered VG33 engine was still kicking. In fact, except for body work and oil leakage, most of the vehicle was still working - it moves!
The engine gives just over 160hp, but I bet it's probably significantly reduced now for a vehicle that's over 20 years.

20240929_152709.jpg
The 'bulletproof' VG33 engine

I decided to throw in the cash and get it, and do repairs.

Now there's a lot of work the car needs, but I thought I won't be spending as much as a used modern car in total.

  • And so I started with all four tyres which were practically gone, including the spare.
    I initially bought used tyres, but got disappointed. In fact, one of the tyres got burst at some point.

So I put in money for brand new ones.
It took me a while to gather money for quality tyres, but I haven't regretted putting brand new tyres ever since.

20240501_133727.jpg

20240929_153817.jpg

  • I serviced the vehicle, changed all the oils, oil and fuel filters, put in a new fuel pump, did some minimal body work, fixed the leaking exhaust pipe and a few other fixes.

20240921_161750.jpg

20240929_152720.jpg

  • Also changed the front brake pads and calipers and the Master brake servo. It's so difficult to find relatively new OEM parts for this vehicle by the way.

20240929_152734.jpg
The Master Break and servo

20240929_160337.jpg
The front wheel brake pads. The rear wheels are however the drum type

  • Changed headlamps, lights, the battery and a few electricals.

20240929_152738.jpg

20240929_155221.jpg

20240929_155147.jpg

After doing all these, I still had one problem. The vehicle was still leaking engine oil and power steering oil.

20240929_152824.jpg

20240929_152832.jpg
The engine oil keeps leaking

I had it checked twice and the technicians changed the sealing for the engine oil underneath.

The steering rack was advised to be changed, but I couldn't afford it. So they went to fix it.

20240929_155810.jpg
The steering rack is old but it still works. I'm skeptical about changing it, cos it's an OEM part

The power steering oil stopped leaking but the engine oil still kept leaking.

I might have to go back to the mechanic. Someone mentioned to me that it could be that the interface between the engine and the transmission is badly sealed.
More so, the engine seat on one side was already weak.

So I'll probably go together that fixed and see if it still leaks.
I hope it doesn't.

I also noticed the front rims get REALLY hot from braking, even after changing the brakes. I understand that the front brakes take over 90% of braking effort, but I didn't think the rims should get so hot.

20240929_160845.jpg

20240929_160337.jpg

Could it be because I use steel rims or perhaps cos my tyre widths are rated 255 instead of the recommended 235?
Or perhaps because I have drum brakes at the back?
Any ideas?

There's still a lot of work to be done on the vehicle, especially with body work and the interior.

20240309_152129.jpg

20240309_155039.jpg

20240929_151606.jpg

20240929_151541.jpg
The interior upholstery and look still needs work

The vehicle currently works but addition to its current problems, it sucks at gas mileage with a saddening 10mpg around the city🥵.

It's torque feels in tune though, as it has no problems with loads and light towing (after all, I bought it to help load equipment for work anyway).

I guess I'd fix the problems one after the other.
Let's see how far I can get with it!

It drives just okay at the moment. Nothing interesting about the drive feel. It doesn't move fast, it's not too slow. It just moves. And of course it moves over anything.

I hope I can get to fix things as time goes. I feel it's probably a long ride to get this oldie to a comparable pristine state, close to a more modern used car.



0
0
0.000
9 comments
avatar

!HBIT

0
0
0.000
avatar

Success! @lolz.burn(2/1) You mined .9 HBIT and the user you replied to received .1 HBIT on your behalf. You can receive 100% of the HBIT by replying to one of your own posts or comments. When you mine HBIT, you're also playing the Wusang: Isle of Blaq game. 🏴‍☠️

Sorry, but you didn't find a bonus treasure token today. Try again tomorrow...they're out there! You can see your random number generated in the Discord server, #hbit-wusang-log channel. | tools | wallet | discord | community | daily <><

Check for bonus treasure tokens by entering your username at a block explorer explorer A, explorer B, or take a look at your wallet. Read about Hivebits (HBIT) or read the story of Wusang: Isle of Blaq.

0
0
0.000
avatar
(Edited)

You asked why the rims might be getting so hot? It's for sure one of two things... either the brakes are binding up causing a great deal of heat (that would be very noticeable...) the other and more likely one is that it might be a wheel bearing failure..

Is there a noise coming from the wheel while driving?

Those are tanky vehicles indeed! Does it have a manual or automatics gearbox?

0
0
0.000
avatar

Hmmnn... I never thought about the wheel bearings you know.
I hear this whistling sound from the front wheels especially the right one when I accelerate. It stops when I hit the brakes. Could it be the bearings?

I intentionally worked on changing the brakes and the calipers partly because I thought it was the brakes.

I noticed the calipers look 'burnt' sort of. You might notice in the pictures. I'm not sure if the brakes are overheating.

The vehicle is a 4 speed automatic. It originally came with an auxiliary gear which was janked off by the previous owner, perhaps due to gear issues. So it's pretty much either locked to 2WD or 4WD, not sure which.

0
0
0.000
avatar

Well it depends if the sound stop completely when you brake... or does the sound go on until the vehicle comes to a complete stop....

It might be a wheel bearing that caused the brake disc to heat up... it might be the brakes...but by your description I wont say it's the brakes... unless the vehicle pulls to one side or is hard to drive...like something is draggin it back... that'll be the brakes. (Hard to explain over a message I know..)

If it's the wheelbearing you can jack up the car on that side and spin the wheel... it should spin freely for a couple of seconds and it should feel smooth when spinning it... if the wheel has a rumble when you spin the wheel it is most likely the wheelbearings. You'll feel it pinching up on stuff when holding your hand on the wheel and turning it

0
0
0.000
avatar

I see. I'll be taking it back to the mechanic's workshop today. I'll ensure they all of these things too and I'll give a feedback.
Thanks a lot!

0
0
0.000
avatar

The caliper is what holds the brake pads in place, you might want to check if the piston in the calipers are seized.

0
0
0.000
avatar

I doubt that, but I'll double check again.

0
0
0.000