Hello everyone...✨

Hello to my dear Hivers and the dear community of artists #HiveDIY, as always very pleased and excited to be here again, showing you my work made with love and especially for you.

For today I continue with the collection that I have been doing of the characters of SANRIO, to continue to carry out Pochacco, as a cute 3D decorative figure made in the quilling technique.

---

---

Here are the others that I have been making, so you can appreciate the creative process of each one of them:

Keroppi:
		Link			https://peakd.com/hive-130560/@dayadam/pompurin-3d-decorative-quilling-technique-engesp-5nh

Pompurin:
		Link			https://peakd.com/hive-130560/@dayadam/pompurin-3d-decorative-quilling-technique-engesp-5nh

Cinnamoroll:
		Link			https://peakd.com/hive-130560/@dayadam/cinnamoroll-3d-decorative-figure-quilling

Badtz Maru:
		Link			https://peakd.com/hive-130560/@dayadam/badtz-maru-3d-decorative-figure

Gudetama:
		Link			https://peakd.com/hive-130560/@dayadam/gudetama-3d-decorative-figure-quilling-technique-engesp--9ss

Chococat:
		Link		https://peakd.com/hive-130560/@dayadam/-chococat-3d-decorative-figure-quilling-technique-engesp--6jn

Kuromi:
		Link			https://peakd.com/hive-130560/@dayadam/kuromi-in-3d-quilling-technique-engesp-a8u

My Melody
		Link			https://peakd.com/hive-130560/@dayadam/my-melody-in-3d-quilling-technique-engesp-fco

---

---

Hoping you like it, I leave you my creative process:

Let's get started:😃

Hola a Todos...✨

Hola a mis queridos Hivers y a la querida comunidad de artistas #HiveDIY, como siempre muy complacida y emocionada de encontrarme por acá nuevamente, mostrándole mi trabajo hecho con mucho amor y especialmente para ustedes.

Para hoy continúo con la colección que he venido haciendo de los personajes de SANRIO, para seguir lleve a cabo a Pochacco, como una cute figura decorativa en 3D realizada en la técnica de quilling.

---

---

Por acá les dejo los demás que he venido haciendo, para que aprecien el proceso de creativo de cada uno de ellos;

Keroppi:
		Link			https://peakd.com/hive-130560/@dayadam/pompurin-3d-decorative-quilling-technique-engesp-5nh

Pompurin:
		Link			https://peakd.com/hive-130560/@dayadam/pompurin-3d-decorative-quilling-technique-engesp-5nh

Cinnamoroll:
		Link			https://peakd.com/hive-130560/@dayadam/cinnamoroll-3d-decorative-figure-quilling

Badtz Maru:
		Link			https://peakd.com/hive-130560/@dayadam/badtz-maru-3d-decorative-figure

Gudetama:
		Link			https://peakd.com/hive-130560/@dayadam/gudetama-3d-decorative-figure-quilling-technique-engesp--9ss

Chococat:
		Link		https://peakd.com/hive-130560/@dayadam/-chococat-3d-decorative-figure-quilling-technique-engesp--6jn

Kuromi:
		Link			https://peakd.com/hive-130560/@dayadam/kuromi-in-3d-quilling-technique-engesp-a8u

My Melody
		Link			https://peakd.com/hive-130560/@dayadam/my-melody-in-3d-quilling-technique-engesp-fco

---

---

Esperando que sea de su agrado, les dejo mi proceso creativo:

Comencemos:😃

---

---

---

---

---

---

---

---

---

---

• We start by taking white ribbon 3 mm wide, with the needle we will roll all the ribbons until we reach the end of it, we seal with extra strong white glue, we will get a closed circle, we will need two of the same.
  
  
• We will mold both circles in a template to mold in the measures number 17 mm and 20 mm, we will take out of the mold we will apply white glue on the inside to prevent deformation let dry very well, we will join both pieces by passing a ribbon around it, this will be the head of the pochacco.
  
  
• For the body we will follow the same parameters as before, this time we will make a green circle and a white circle, both will be molded in the 17 mm size, we will join both pieces passing a green ribbon around them.

---

---

---

---

• Comenzamos tomando cinta para quienes de color blanco de 3 mm de ancho, con la aguja vamos a enrollar todas las cintas hasta llegar al final de la misma sellamos con pega blanca extra fuerte, vamos a conseguir un círculo cerrado, necesitaremos dos iguales.


• Moldearemos ambos círculos en una plantilla para moldear en las medidas número 17 mm y 20 mm, sacaremos del molde aplicaremos pega blanca en su parte interna para evitar que se deformen dejamos secar muy bien, uniremos ambas piezas pasando una cinta alrededor de la misma, este será la cabeza del pochacco.


• Para el cuerpo seguiremos los mismos parámetros anteriores, esta vez realizaremos un círculo verde y uno blanco, ambos los moldearemos en la medida 17 mm, uniremos pasando una cinta verde alrededor.

---

---

---

• For the legs we will make 2 small closed circles, these we will grind them in the shape of a drop and glue them at the bottom.
  
  
• To make the arms, we will make 2 closed circles combining white and green tape, we will take a little out with the tip of a brush, apply glue on the inside and glue on the sides of the body.
  
  
• For the tail we will make a closed circle combining black and white ribbon, we will also draw outwards with a brush, we glue on the back of the body.

• Para las patitas realizaremos 2 pequeños círculos cerrados, estos los moleremos en forma de gota pegaremos en la parte de abajo.


• Para realizar los brazos, vamos a realizar 2 círculos cerrados combinando cinta blanca y verde, sacaremos un poco hacia afuera con la punta de un pincel, aplicamos pega por la parte interna y pegaremos a los lados del cuerpo.


• Para la cola realizaremos un círculo cerrado combinando cinta negra y blanca, también sacaremos hacia afuera con un pincel, pegamos en la parte de atrás del cuerpo.

---

---

---

---

• We will make the ears making 2 open circles of black color which we will mold as a kind of diamond, we glue on the doll's head.
  
  
• Finally we will make the eyes and nose by cutting out a small piece of black cardboard, we glue on the face of the doll.

This is the end of this small 3D decorative figure of Pochacco, using the quilling technique.

• Realizaremos las orejitas haciendo 2 círculos abiertos de color negro los cuales moldearemos como una especie de diamante, pegamos en la cabeza de muñeco.


• Por último realizaremos los ojos y nariz recortando de un trocito de cartulinas de color negro, pegamos de la cara del muñeco.

De esta manera finalice esta pequeña figura decorativa en 3D de Pochacco, en la técnica de técnica de quilling.

---

---

---

---

---

---

---

---

---

---

What did you think, did you like it?

I hope you did, I hope you liked my explanation, procedure and photos, I made them with love for you.

"Let out that muse that inspires you, and let your imagination fly".

Thank you all, see you next time ✨.

¿Que les pareció, les gustó?

Espero que sí, que les haya gustado mi explicación, procedimiento y fotos, los hice con mucho cariño por y para ustedes.

"Deja salir esa musa que te inspira, y deja volar tu imaginación".

Gracias a todos, nos vemos en la próxima✨

All photos used in this post are of my authorship and have been taken on my personal cell phone a Redmi 9T, edited in InShot and Canva

Banner and separator made by me in Canva

Translated with the help of DeepL

Todas las fotos usadas en este post son de mi autoría y han sido sacadas en mi celular personal un Redmi 9T, editadas en InShot y Canva

Banner y separador hecho por mí en Canva

Traducido con la ayuda de DeepL

Posted Using INLEO